Pelletstove Ducted

Dielle Bump 50 Tube

Pellet stove with a unique and unmistakable shape. Black painted steel sides and "magic" glass sliding door for an elegant total black effect. Equipped with hermetic technology, top and rear flue exhaust and ducting channels up to 6 meters. On request you can combine a handheld remote control, a touch screen control panel or your smartphone.

Technical data Dielle Ostro Bump 50 Tube

• Global power: 2.8-7.2kW
• Nominal power: 2.6-6.5 kW
• Consumption per hour: 0.6-1.5 kg
• Yield: 92.5-89.5%
• Tank capacity: 25 ltr
• Heated space (indicative of construction type and heat loss): 170m3
• Emission of CO (13% O2): 0.011135

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.


 

Dielle Bump 80 Tube

Pellet stove with a unique and unmistakable shape. Black painted steel sides and "magic" glass sliding door for an elegant total black effect. Equipped with hermetic technology, top and rear flue exhaust and ducting channels up to 6 meters. On request you can combine a handheld remote control, a touch screen control panel or your smartphone.

Technical data Dielle Ostro Bump 80 Tube

• Global power: 2.8-9.7kW
• Nominal power: 2.6-8.5 kW
• Consumption per hour: 0.6-2.0 kg
• Yield: 92.5-87.5%
• Tank capacity: 25 ltr
• Heated space (indicative of construction type and heat loss): 230m3
• Emission CO (13% O2): 0.019241

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.



 

Dielle Libeccio 100 Tube

Pellet stove with steel structure, patented bottom feeder and cast iron door. Equipped with two outputs that can be channeled up to 12 meters and managed separately by thermostats and a room fan (max. 2.5 kW). You can use a handheld remote control, a control panel or your smartphone as an option.

Technical data Dielle Libeccio 100 Tube

• Global power: 2.8-11.7kW
• Rated power: 2.7-10.0 kW
• Consumption per hour: 0.6-2.5 kg
• Efficiency: 96-89%
• Tank capacity: 35 ltr
• Heated space (indicative of construction type and heat loss): 185m3
• Emission of CO (13% O2): 0.02198

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.


 

Dielle Ostro 100 Bump Tube Turbo

The ideal pelletstove with multiple heating fans for those who, together with maximum heating efficiency, are looking for design and elegance. Total black effect thanks to the black painted steel sides and ‘magic’ glass sliding door. Equipped with three configurable fans (for ambient air or ducting) that can be managed separately by means of zone thermostats.
 

Technical data Dielle Ostro 100 Bump Tube Turbo

• Global power: 2.8-11.7kW
• Rated power: 2.7-10.0 kW
• Consumption per hour: 0.6-2.5 kg
• Efficiency: 96-89%
• Tank capacity: 37.5 ltr
• Heated space (indicative of construction type and heat loss): 300m3
• Emission of CO (13% O2): 0.02198

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.

Dielle Ostro 100 Bump Tube

The ideal pellet stove for those who, together with maximum heating efficiency, are looking for design and elegance. Total black effect thanks to the black painted steel sides and ‘magic’ glass sliding door. Equipped with three configurable fans (for ambient air or ducting) that can be managed separately by means of zone thermostats.
 

Technical data Dielle Ostro 100 Bump Tube

• Global power: 2.8-11.7kW
• Rated power: 2.7-10.0 kW
• Consumption per hour: 0.6-2.5 kg
• Efficiency: 96-89%
• Tank capacity: 37.5 ltr
• Heated space (indicative of construction type and heat loss): 300m3
• Emission of CO (13% O2): 0.02198

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.

Dielle Ostro 100 Tube Turbo

The ideal pellet stove for those looking for maximum heating efficiency, in just 31 cm. Coated steel cladding and cast iron door. Equipped with three configurable fans (for ambient air or ducts) that can be individually controlled by zone thermostats. You can combine a handheld remote control, a touch screen control panel or your smartphone.

Technical data Dielle Ostro 100 Tube Turbo

• Global power: 2.8-11.7kW
• Rated power: 2.7-10.0 kW
• Consumption per hour: 0.6-2.5 kg
• Efficiency: 96-89%
• Tank capacity: 37.5 ltr
• Heated space (indicative of construction type and heat loss): 300m3
• Emission of CO (13% O2): 0.02198

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.

Dielle Ostro 100 Tube

The ideal pellet stove for those looking for maximum heating efficiency, in just 31 cm. Coated steel cladding and cast iron door. Equipped with two configurable fans (for ambient air or ducts) that can be individually controlled by zone thermostats. You can combine a handheld remote control, a touch screen control panel or your smartphone

Technical data Dielle Ostro 100 Tube

• Global power: 2.8-11.7kW
• Rated power: 2.7-10.0 kW
• Consumption per hour: 0.6-2.5 kg
• Efficiency: 96-89%
• Tank capacity: 37.5 ltr
• Heated space (indicative of construction type and heat loss): 300m3
• Emission of CO (13% O2): 0.02198

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.

 

Dielle Ostro 50 Tube Glass

Due to the small thickness, this stove is particularly suitable for narrow spaces. Hermetic technique, with painted steel cladding and "magical" glass door.
Top and rear exhaust of flue gases, with ducting channels up to 6 meters, equipped with a proportional air direction control valve. You can combine a handheld remote control, a touch screen control panel or your smartphone.

 

Pellet stove hermetically closed

This pellet stove is equipped with hermetic technology as standard. This means that the pellet stove works on the basis of the closed system. The pellet stove obtains 100% of the oxygen supply via the external air supply connection. This pellet stove is therefore extremely suitable for rooms with, for example, a heat recovery system or other factors that influence the air balance in the room, such as an extractor hood or mechanical extraction.
 

Technical data Dielle Ostro 50 Tube Glass

• Global power: 2.8-7.2kW
• Nominal power: 2.6-6.5 kW
• Consumption per hour: 0.6-1.5 kg
• Yield: 92.5-89.5%
• Tank capacity: 25 ltr
• Heated space (indicative of construction type and heat loss): 170m3
• Emission of CO (13% O2): 0.011135

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.

 

Dielle Ostro 50 Tube

The ultimate technology in a thickness of only 32 cm. Airtight stove with coated steel cladding, with combustion chamber and steel door.
Top and rear flue gas discharge, with ducting channels up to 6 meters and equipped with a proportional air direction control valve.
You can combine a handheld remote control, a touch screen control panel or your smartphone.

 

Pellet stove hermetically closed

This pellet stove is equipped with hermetic technology as standard. This means that the pellet stove works on the basis of the closed system. The pellet stove obtains 100% of the oxygen supply via the external air supply connection. This pellet stove is therefore extremely suitable for rooms with, for example, a heat recovery system or other factors that influence the air balance in the room, such as an extractor hood or mechanical extraction.
 

Technical data Dielle Ostro 50 Tube

• Global power: 2.8-7.2kW
• Nominal power: 2.6-6.5 kW
• Consumption per hour: 0.6-1.5 kg
• Yield: 92.5-89.5%
• Tank capacity: 25 ltr
• Heated space (indicative of construction type and heat loss): 170m3
• Emission of CO (13% O2): 0.011135

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.

 

Dielle Ostro 80 Tube Glass

Due to the small thickness, this stove is particularly suitable for narrow spaces. Hermetic technique, with painted steel cladding and "magical" glass door.
Top and rear exhaust of flue gases, with ducting channels up to 6 meters, equipped with a proportional air direction control valve. You can combine a handheld remote control, a touch screen control panel or your smartphone.

 

Pellet stove hermetically closed

This pellet stove is equipped with hermetic technology as standard. This means that the pellet stove works on the basis of the closed system. The pellet stove obtains 100% of the oxygen supply via the external air supply connection. This pellet stove is therefore extremely suitable for rooms with, for example, a heat recovery system or other factors that influence the air balance in the room, such as an extractor hood or mechanical extraction.
 

Technical data Dielle Ostro 80 Tube Glass

• Global power: 2.8-9.7kW
• Nominal power: 2.6-8.5 kW
• Consumption per hour: 0.6-2.0 kg
• Yield: 92.5-87.5%
• Tank capacity: 25 ltr
• Heated space (indicative of construction type and heat loss): 230m3
• Emission CO (13% O2): 0.019241

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.



 

Dielle Ostro 80 Tube

The ultimate technology in a thickness of only 32 cm. Airtight stove with coated steel cladding, with combustion chamber and steel door.
Top and rear flue gas discharge, with ducting channels up to 6 meters and equipped with a proportional air direction control valve.
You can combine a handheld remote control, a touch screen control panel or your smartphone.

 

Pellet stove hermetically closed

This pellet stove is equipped with hermetic technology as standard. This means that the pellet stove works on the basis of the closed system. The pellet stove obtains 100% of the oxygen supply via the external air supply connection. This pellet stove is therefore extremely suitable for rooms with, for example, a heat recovery system or other factors that influence the air balance in the room, such as an extractor hood or mechanical extraction.
 

Technical data Dielle Ostro 80 Tube

• Global power: 2.8-9.7kW
• Nominal power: 2.6-8.5 kW
• Consumption per hour: 0.6-2.0 kg
• Yield: 92.5-87.5%
• Tank capacity: 25 ltr
• Heated space (indicative of construction type and heat loss): 230m3
• Emission CO (13% O2): 0.019241

Bottom feeder Dielle pellet stove
The Dielle pellet stove works with a patented bottom feeder, which means that the pellets are fed from the bottom into an open burner pot, in this way the pellets are first evenly dried and preheated without disturbing the combustion process.
This ensures an even degassing and a complete combustion with a nicer and quieter flames.

1. Automatic cleaning. By supplying new pellets, the after-cinder ash residues are pushed over the fire ring and then fall into the ash pan. This means no manual or  complicated systems to keep a burner tray clean.
2. Less Ash Remnants. Less emissions (reduction of up to 53% compared to traditional pellet stoves).
3. No disturbance of the combustion process as with pellet stoves where the pellets are thrown into a burner tray from above.
4. Calmer and more natural flames.
5. Also in low power choices a nice flame picture with the bottom feeder. Due to the unique properties of the system, you will experience a calm and natural flame  picture even in the low power choices.

The bottom feeder also has advantages in the Stand-by or eco mode. If, for example, the temperature of your living room reaches the set temperature, the stove will go into standby mode, the stove will slowly go out. No pellets are consumed during the standby period. By extinguishing, the glowing parts will be stored in the bottom of the burner pot for a longer period of time. This allows the bottom feeder to make a quicker start-up and with a Dielle pellet stove you don't have to wait for a cooling and cleaning phase as with a traditional pellet stove.